Scan liveries not picking up new liveries

[KC10Driver 1]

Love the product!  I'm using it for P3Dv5.3 and MSFS (new installation).  I had the same issue with P3D as I'm having with MSFS and I ended up copying the parameters from another laptop I have that has PSXT on it to get the new laptop I'm now using to see MOST of my 22000 AI.  I don't have that luxury with MSFS.  I've manually added the two AI folders I'm presently using with MSFS into the parameters file but PSXT isn't recognizing any new liveries when I do a livery scan.  Would you mind looking at my parameters file from the following location (C:\Users\russo\AppData\Roaming\PSXT_MSFS) and see what, if anything, I need to do to get PSXT to see those new liveries, please?  (Parameters file contents listed below):  (PS, yes, I'm aware there is no "lfolder0" but I HAVE tried adding one of the AI folders as an lfolder0 with ZERO success in getting the program to recognize anything other than default)

 

<?xml version="1.0"?>
<parameters>
    <parameter name="SYNC_WITH_ARCHIVE" value="true" />
    <parameter name="MY_MULT_REGS" value="false" />
    <parameter name="SUPPRESS_STUB" value="true" />
    <parameter name="APPLE" value="false" />
    <parameter name="RANDOM" value="true" />
    <parameter name="HIGH_PERF_AIRCRAFT" value="false" />
    <parameter name="LIGHT_AIRCRAFT" value="false" />
    <parameter name="HELICOPTERS" value="false" />
    <parameter name="FOLLOW_ME_CAR" value="false" />
    <parameter name="HINTS" value="true" />
    <parameter name="GLIDERS" value="false" />
    <parameter name="ALWAYS_ON_TOP" value="false" />
    <parameter name="GARMIN" value="false" />
    <parameter name="LIG_AUTOMATIC" value="true" />
    <parameter name="LIG_PRIORITIZE" value="false" />
    <parameter name="AFG_AUTOMATIC" value="true" />
    <parameter name="CLIENT" value="false" />
    <parameter name="SERVER" value="false" />
    <parameter name="BIGGEST" value="true" />
    <parameter name="NAV_LIGHTS_WHILE_PARKED" value="true" />
    <parameter name="AUTO_RANGE" value="false" />
    <parameter name="LEARN_DESTINATION" value="false" />
    <parameter name="COLLISION_USER_AIR" value="true" />
    <parameter name="COLLISION_USER_GND" value="false" />
    <parameter name="COLLISION_LIVE_PARKED_GND" value="true" />
    <parameter name="GENERIC_PARKING_PERCENTAGE" value="-1" />
    <parameter name="LIGHT_SWITCH_CODE" value="8" />
    <parameter name="AUTO_RANGE_GND" value="8" />
    <parameter name="AUTO_RANGE_LE10" value="10" />
    <parameter name="AUTO_RANGE_LE15" value="12" />
    <parameter name="AUTO_RANGE_LE20" value="15" />
    <parameter name="AUTO_RANGE_LE30" value="25" />
    <parameter name="AUTO_RANGE_LE40" value="35" />
    <parameter name="AUTO_RANGE_GT40" value="40" />
    <parameter name="MAIN_WINDOW_X" value="400" />
    <parameter name="MAIN_WINDOW_Y" value="20" />
    <parameter name="DELAY_IN_SECONDS" value="30" />
    <parameter name="MATCHING_DEPTH" value="8" />
    <parameter name="PARKED_MATCHING_DEPTH" value="8" />
    <parameter name="LATERAL_RANGE" value="40" />
    <parameter name="SNAPSHOT_MINUTES" value="20" />
    <parameter name="PROGRAM_VERSION" value="35.1.2" />
    <parameter name="DESTINATION_AIRPORT" value="" />
    <parameter name="DESTINATION_GATE" value="" />
    <parameter name="BLOCK_CALLSIGN" value="" />
    <parameter name="FLIGHTPLANS_FOLDER" value="" />
    <parameter name="MSFS_INSTALL_PATH" value="D:\MSFS2020" />
    <parameter name="RUNNING" value="false" />
    <parameter name="lfolder1" value="D:\MSFS2020\Community" />
    <parameter name="lfolder2" value="D:\MSFS2020\Community\aig-aitraffic-oci-beta" />
    <parameter name="lfolder3" value="D:\MSFS2020\Community\fsltl-traffic-base" />
    <parameter name="afolder0" value="D:\MSFS2020\Official" />
    <parameter name="afolder1" value="D:\MSFS2020\Community" />
</parameters>
 

[kiek 1,287]

A quick answer from my holiday location ...

You forgot to switch off scan Liveries Automatic in the GUI. In automatic mode it is NOT using the paths defined by the lfolder parameters.

Btw , remove lfolder1, that one is redundant.

Note that you dont have to start with using lfolder0. You could have used lfolder4 and lfolder13 too. You only have to remember that 4 has higher priotity then 13 if you have checked priority in the GUI.

Edited March 9, 2023 by kiek

[KC10Driver 1]

Hi Kiek!  

Thanks for responding from your holiday destination!  I changed it up per your conversation and my numbers haven't changed, which is odd.  I'm still showing 2232 liveries with both OCI and FSLTL installed...a number quite a bit lower than I'm used to seeing with P3D (22151).  I know I'm not going to have the same number so maybe someone can tell me if that 2232 looks about right with just OCI and FSLTL in.  Below is the new parameters data, WHEN YOU HAVE TIME!  Ha!  Go have a nice cold one instead of looking at this!  And have a nice vacation!

 

<?xml version="1.0"?>
<parameters>
    <parameter name="SYNC_WITH_ARCHIVE" value="true" />
    <parameter name="MY_MULT_REGS" value="false" />
    <parameter name="SUPPRESS_STUB" value="true" />
    <parameter name="APPLE" value="false" />
    <parameter name="RANDOM" value="true" />
    <parameter name="HIGH_PERF_AIRCRAFT" value="false" />
    <parameter name="LIGHT_AIRCRAFT" value="false" />
    <parameter name="HELICOPTERS" value="false" />
    <parameter name="FOLLOW_ME_CAR" value="false" />
    <parameter name="HINTS" value="true" />
    <parameter name="GLIDERS" value="false" />
    <parameter name="ALWAYS_ON_TOP" value="false" />
    <parameter name="GARMIN" value="false" />
    <parameter name="LIG_AUTOMATIC" value="false" />
    <parameter name="LIG_PRIORITIZE" value="false" />
    <parameter name="AFG_AUTOMATIC" value="true" />
    <parameter name="CLIENT" value="false" />
    <parameter name="SERVER" value="false" />
    <parameter name="BIGGEST" value="true" />
    <parameter name="NAV_LIGHTS_WHILE_PARKED" value="true" />
    <parameter name="AUTO_RANGE" value="false" />
    <parameter name="LEARN_DESTINATION" value="false" />
    <parameter name="COLLISION_USER_AIR" value="true" />
    <parameter name="COLLISION_USER_GND" value="false" />
    <parameter name="COLLISION_LIVE_PARKED_GND" value="true" />
    <parameter name="GENERIC_PARKING_PERCENTAGE" value="-1" />
    <parameter name="LIGHT_SWITCH_CODE" value="8" />
    <parameter name="AUTO_RANGE_GND" value="8" />
    <parameter name="AUTO_RANGE_LE10" value="10" />
    <parameter name="AUTO_RANGE_LE15" value="12" />
    <parameter name="AUTO_RANGE_LE20" value="15" />
    <parameter name="AUTO_RANGE_LE30" value="25" />
    <parameter name="AUTO_RANGE_LE40" value="35" />
    <parameter name="AUTO_RANGE_GT40" value="40" />
    <parameter name="MAIN_WINDOW_X" value="400" />
    <parameter name="MAIN_WINDOW_Y" value="20" />
    <parameter name="DELAY_IN_SECONDS" value="30" />
    <parameter name="MATCHING_DEPTH" value="8" />
    <parameter name="PARKED_MATCHING_DEPTH" value="8" />
    <parameter name="LATERAL_RANGE" value="40" />
    <parameter name="SNAPSHOT_MINUTES" value="20" />
    <parameter name="PROGRAM_VERSION" value="35.1.2" />
    <parameter name="DESTINATION_AIRPORT" value="" />
    <parameter name="DESTINATION_GATE" value="" />
    <parameter name="BLOCK_CALLSIGN" value="" />
    <parameter name="FLIGHTPLANS_FOLDER" value="" />
    <parameter name="MSFS_INSTALL_PATH" value="D:\MSFS2020" />
    <parameter name="RUNNING" value="false" />
    <parameter name="lfolder1" value="D:\MSFS2020\Community\aig-aitraffic-oci-beta" />
    <parameter name="lfolder2" value="D:\MSFS2020\Community\fsltl-traffic-base" />
    <parameter name="afolder0" value="D:\MSFS2020\Official" />
    <parameter name="afolder1" value="D:\MSFS2020\Community" />
</parameters>
 

[kiek 1,287]

Sounds fine with me (at least for FSLTL). It all depends on how many AIG models/liveries you have installed in MSFS.

You can check the \liveries\AI_liveries.xml file to see if it contains AIG aircraft too.

Edited March 10, 2023 by kiek

[KC10Driver 1]

Fantastic.  Thanks!!!